26th July 2022 for Immediate Release
SALT LAKE CITY, UTAH
Cementation Americas (Cementation) a le plaisir d’annoncer l’achèvement de l’élévation du puits #5 de Solvay Chemicals à Green River, Wyoming.
Project requirements were to complete a 22 ft. diameter shaft, complete with concrete liner, from surface to a depth of 1,506 ft. Concrete liner thickness increased as the depth of the shaft increased, so the initial concept was to complete a pilot slash raise with a raise bore drill and then slash from the top down to achieve the differing diameters to accommodate concrete liner thickness.
Cementation Au lieu de cela, nous avons proposé une solution de puits foré sur toute la surface avec des diamètres variables pour chaque section. We worked closely with Sandvik to design, engineer and manufacture a reaming head that could be diminished in diameter rather than manufacturing different diameters of outside wings. Final design allowed for five diameter options; maximum of 26.67 ft., down to 24.48 ft, in increments of 6.6 inches. The 26.67 ft. diameter reamer consisted of 12 individual sections, 46 cutters and weighed 136,000 lbs.
Après l’achèvement de l’excavation et du revêtement du collier de 68 pieds de profondeur, la foreuse à élévation Strata 950 de Cementationa été installée au-dessus du collier et un trou pilote de 16 pouces de diamètre a été foré à l’aide du système de forage vertical rotatif (RVDS) de Micon. When the completed pilot hole was surveyed, the total deviation from vertical was found to be less than 4 inches over entire length of pilot hole.
Based on the pilot hole survey it was determined that the first leg of the shaft would be reamed to 26.13 ft. diameter for 588 ft. of shaft, followed by 25.02 ft. diameter for the next 285 ft. of shaft and 24.47 ft. diameter for the final 535 ft. of shaft to surface.
L’alésage du puits a été achevé le 24 avril et les équipes du puits Cementation sont en train d’achever le revêtement du puits. This raise was one of the largest ever pulled in the America’s and was completed without incident. Its
success was the result of a collaborative effort by all parties involved by providing the best technical solution for the Solvay Chemicals #5 Shaft.
- The Solvay reaming head at the Sandvik workshop in Sudbury, Ontario, Canada
- Strata 950 raise drill with RVDS unit
- Reamer during first servicing
À propos de Cementation Americas :
Cementation Americas est un groupe de sociétés spécialisées dans le domaine des mines et des minéraux, fournissant des solutions souterraines et de surface pour les mines et les installations de traitement des minéraux en aval dans le monde entier. Cementation Americas est un spécialiste de solutions durables d’ingénierie, d’approvisionnement, de construction, de mise en service, d’exploitation et d’entretien de l’industrie de l’exploitation minière et du traitement des minéraux. Cementation Americas fait partie du groupe de sociétés Murray & Roberts, qui fournit des services complets aux clients de l’industrie minière et du traitement des minéraux sur six continents.
Pour plus d’informations sur Cementation, visitez www.cementation.com.
– –
Pour plus d’informations, veuillez contacter :
Patrick Hudd, International & Marketing, Cementation Canada
North Bay t : +1 705 472.3381
patrick.hudd@cementation.com